3D Modelling & Trajectory Video – Pictures from DJI Inspire 1 and Phantom 3 Professional

Written by on 17/09/2015 in All, RC, RC Multicopter, RC Vids, Take me to with 0 Comments

Tested out the possibility of acquiring simultaneously pictures from DJI Inspire 1 and Phantom 3 Professional and merged them into a 3D Model afterwards in PIX4D. Took us approximately 15 minutes to obtain 430 pictures on a predefined mixed flight path for both multicopter.

Continue Reading

DJI Phantom 3 Professional – The unconventional review

Written by on 28/05/2015 in All, How To, RC, RC Multicopter, RC Vids, Take me to with 0 Comments

Mr. Mandala drove his newly acquired Phantom 3 Professional to us for a quick walk-through on all the features and some differences regarding the Inspire 1. We covered pretty much everything and even included some tips for photography. We are of course open to more suggestions if you need additional information. Enjoy the unconventional review […]

Continue Reading

How to: NAZA and GoPro 3 BE dont work well together sometimes

Written by on 28/05/2015 in All, How To, RC, RC Multicopter, RC Vids, Take me to with 0 Comments

Made a quick recording of what me and a friend discovered some weeks ago while being out flying. We wanted to attach the GoPro on top of his Tarot 650 to record some footage where we saw that the GPS gotten lost every time we turn on the GoPro. The GoPro was quite close to […]

Continue Reading

3D Robotics Aero Maiden Flight

Written by on 28/05/2015 in All, RC, RC Planes, RC Vids, Take me to with 0 Comments

Maiden flight of the 3D Robotics Aero. Thanks Heinz for filming and Mat for throwing :-). The 3D Aero is equipped with a Pixhawk Autopilot System and capable of fully autonomous flight. In the Video I was switching between manual and stabilization for trimming the plane. The plane flies absolutely stable and you can do […]

Continue Reading

Sebart 3D Monster SU29 by Stefan Vögeli

Written by on 17/04/2015 in All, RC Planes, RC Vids, Take me to with 0 Comments

Once again, Stefan Vögeli is rockin his Sebart 3D Monster Su29. Enjoy the flight!! Technical Data of the machine: Sebart 3d monster su29 194cm wing span 6s hacker c-50 10l jeti ESC 100amp Prop mezjlik 20/8 karbon Futaba BLS 451 3x and 1x BLS 452

Continue Reading

Savex L39 Albatros Jet – with just a slightly failed landing

Written by on 17/04/2015 in All, RC, RC Planes, RC Vids, Take me to with 0 Comments

The first sunny days are coming to us as well and we went out to get some stuff in the air. We have Mat starring on the sticks this time with an unfortunately missed second landing after a very impressive first flight. Technical data of the model: Savex Albatros L39 – http://www.savex.cz 12S Battery that […]

Continue Reading

Goblin 380 yellow – Hardcore flight in 4k

Written by on 24/03/2015 in All, RC, RC Helis, Take me to with 0 Comments

Mario just brought his new Goblin 380 for a quick flight. Check out the slow mo’s recorded with a Sony FS700 on 120fps. Full description of the components built in the heli is of course in the vid. Its truly an awesome little machine second to none.

Continue Reading

How to: DJI Naza and Wookong-M gains explained

Written by on 24/03/2015 in All, How To, RC, RC Multicopter, Take me to with 0 Comments

Tutorial on what the actual gains mean in the Naza and Wookong configurator and what the influence is when decreasing or increasing specific ones. Covers all the gain settings incl. the advanced ones on Wookong-M. Feel free to ask questions here in the comments if something is not clear. There are many additional explanations out […]

Continue Reading

Top