How To

Tutorials and setups

DJI Phantom 3 Professional – The unconventional review

Written by on 28/05/2015 in All, How To, RC, RC Multicopter, RC Vids, Take me to with 0 Comments

Mr. Mandala drove his newly acquired Phantom 3 Professional to us for a quick walk-through on all the features and some differences regarding the Inspire 1. We covered pretty much everything and even included some tips for photography. We are of course open to more suggestions if you need additional information. Enjoy the unconventional review […]

Continue Reading

How to: NAZA and GoPro 3 BE dont work well together sometimes

Written by on 28/05/2015 in All, How To, RC, RC Multicopter, RC Vids, Take me to with 0 Comments

Made a quick recording of what me and a friend discovered some weeks ago while being out flying. We wanted to attach the GoPro on top of his Tarot 650 to record some footage where we saw that the GPS gotten lost every time we turn on the GoPro. The GoPro was quite close to […]

Continue Reading

How to: DJI Naza and Wookong-M gains explained

Written by on 24/03/2015 in All, How To, RC, RC Multicopter, Take me to with 0 Comments

Tutorial on what the actual gains mean in the Naza and Wookong configurator and what the influence is when decreasing or increasing specific ones. Covers all the gain settings incl. the advanced ones on Wookong-M. Feel free to ask questions here in the comments if something is not clear. There are many additional explanations out […]

Continue Reading

3D Modeling and trajectory with GPS tagged pictures from NIR Camera

Written by on 10/11/2014 in All, How To, RC, RC Multicopter, Take me to with 0 Comments

Just a quick test with sample GPS tagged data from a Canon NIR camera. This represents the 3D model that is going to be used for NDVI afterwards. Ill post more on the process in the next days on http://www.locoracers.com. Stay tuned

Continue Reading

How to: Balance a mid size Gimbal

Written by on 30/06/2014 in All, How To, RC, RC Multicopter, RC Vids, Take me to with 0 Comments

Tutorial on balancing a small to mid size 3 axis Gimbal mechanically from the ground up using a DYS gimbal with a Sony NEX 5T in this sample. The video covers all axis (yaw, roll and pitch). Enjoy the video and leave comments or feel free to ask questions. More videos from the Brushless Gimbal […]

Continue Reading

How to: Alexmos/Basecam Controller – Make it work perfectly

Written by on 30/06/2014 in All, How To, RC, RC Multicopter, RC Vids, Take me to with 2 Comments

Full Tutorial on the setting for the Alexmos/Basecam 8 Bit controller including calibration of the IMU, PID Tuning and explaining PID as such, how to tune the settings to get it perfectly stable and some other considerations. Enjoy the tutorial and leave comments or questions if something is not clear. More videos from the Brushless […]

Continue Reading

Brushless Gimbal test with Sony A99 and Sony FS700

Written by on 27/06/2014 in All, How To, RC, RC Multicopter, RC Vids, Take me to with 0 Comments

Just a very short test with a Sony A99 and the FS700 on a Brushless Gimbal. I invested not more then 10 Minutes for each device to balance the Gimbal mechanically and it worked surprisingly well. On the FS700 you can see that its slightly off balance when powering on. Technical details: Using Alexmos 8bit […]

Continue Reading

Arris Zhanyou 3-axis Gimbal Factory Settings

Written by on 02/06/2014 in All, How To, RC, RC Multicopter, Take me to with 0 Comments
Arris Zhanyou 3-axis Gimbal Factory Settings

Those are the factory settings of the Arris Zhanyou Factory Settings and work perfectly out of the box for a Sony NEX 7. 12V input power.

Continue Reading

Top